Update to $5 measure stick

After using the measuring stick a few times, I have made two modifications to it.

1. I added another piece of wood under the bottom base piece, it is a little larger and thicker than the base. I found that it needed more weight as the whole thing moved slightly after some time at the wheel.

2. I added a piece of plastic (cut from the lid to a cottage cheese container) in the shape of a arrow to the arm nearest the pot. Using a sharpie, I colored it black so it is more visible.

Aside from that, I really like the measure stick!

How to Make a Pottery Measure Stick for Under $5

I saw a measure stick in Pottery Making Illustrated which looks very nice, just out of my price range. So, I made my own for under $4 using wood scraps.

For the most part, my pottery is not all exact and the same size... close enough for "sets" yet all are a little different in size and shape.

There are times, a special order for example or working towards a very large collection when I would like to be able to know exactly what size I made to make more of the same or have an easy way to re-create the same size for special orders.

Material List:
2 drywall screws
1 Piece of wood approx 4 x 2 and 1/2" thick (base)
1 Piece of wood approx 1 1/2 x 1 1/2 and 10" long (vertical stand)
1 Piece of trim board type wood approx 1" x 1/4" and 14" long (movable arm)
Wood Glue (I did not use but may be a good idea)
Bolt (I found one with a knob)
wing nut
locking washer

After cutting the wood to size, Drill holes (use a drill bit the same size or a tiny bit larger than your bolt), every few inches on the two long pieces of wood.

Screw the base onto the vertical arm. It is easier if you drill two pilot holes before trying to screw the pieces together.

Assemble the parts by putting the bolt through one of the holes in the vertical piece then put the "arm" onto the bold then lock washer and wing nut.

That is it! You now have a measuring stick.

Back at it- Studio set-up

Now that the excitement, preparation and clean up from ARTour Open Studio is over, I am back to the normal routine in the studio.

Drop-in has started up again and the first Mini Beginner Throwing class starts this Sunday.

I rearranged the studio (just a tiny bit) to improve the flow of work during Drop-in pottery nights, have moved part of the retail pottery display to shelves against the wall,


added additional space for wedging, handbuilding and work space along the wall,


Put all of the handbuilding tools, supplies and "texture" stamps and tools in a single area,

organized the glazes and incorporated the "Cink" a recirculating sink for washing clay from ceramic tools and equipment and put little shelves next to the glaze spray booth for the mason jars of glaze.

Whew, it was a lot of work, fun to do and I am liking the end results!