Cleaning Pieces

It is far easier to tidy up a piece while it is still wet as apposed to once it is bone dry or worse yet, after being bisque fired.

For Wheel thrown pieces, I use my finger to smooth out any rough spots on the wall of the piece, to soften the top rim and foot. I am not a fan of holding a wet sponge and turning the piece of the wheel. It always seems to me that I end up sanding those pieces to get rid of the little rough spots. My theory is the sponge takes away the fine, smooth clay and leaves the larger grains.

For handbuilding or altered pieces double check for any small crumbs of clay left of the piece. Also examine all edges and corners to be sure they have a nice, smooth, round edge. Sharp corners become even sharper once glaze is applied and the piece is fired.