Glaze Spray Booth

Spray Booth

"Window Vision"
An example of a piece glazed using the spray booth


With a spray booth I am able to blend colors for very interesting effects which can not be done with dipping the pottery piece into a bucket of glaze.

Stu made this for me using plastic sheeting we had left over from our veggie garden cold boxes. Enough light comes through the clear plastic that I don't need extra lighting inside the booth.

The spray booth is mounted to the wall on normal shelve brackets. I have found clean up when I put some newspaper under the banding wheel.The ceiling of the spray booth has been fitting with a cheap furnace filter vent which is simple to open and clean or replace the bottom filters.

the boxes on top of the spray booth hold a stack of furnuce filters and the bathroom type fan which turns on/off by a switch.

The compressor (sits under the spray booth) is set to 30 psi. I use a critter sprayer and mason jars (you can see two of them to the left of the booth) filled with different color glazes. Wearing a mask while spraying glaze is mandatory!