How to Make a Pottery Measure Stick for Under $5

I saw a measure stick in Pottery Making Illustrated which looks very nice, just out of my price range. So, I made my own for under $4 using wood scraps.

For the most part, my pottery is not all exact and the same size... close enough for "sets" yet all are a little different in size and shape.

There are times, a special order for example or working towards a very large collection when I would like to be able to know exactly what size I made to make more of the same or have an easy way to re-create the same size for special orders.

Material List:
2 drywall screws
1 Piece of wood approx 4 x 2 and 1/2" thick (base)
1 Piece of wood approx 1 1/2 x 1 1/2 and 10" long (vertical stand)
1 Piece of trim board type wood approx 1" x 1/4" and 14" long (movable arm)
Wood Glue (I did not use but may be a good idea)
Bolt (I found one with a knob)
wing nut
locking washer

After cutting the wood to size, Drill holes (use a drill bit the same size or a tiny bit larger than your bolt), every few inches on the two long pieces of wood.

Screw the base onto the vertical arm. It is easier if you drill two pilot holes before trying to screw the pieces together.

Assemble the parts by putting the bolt through one of the holes in the vertical piece then put the "arm" onto the bold then lock washer and wing nut.

That is it! You now have a measuring stick.